Built For
The Modern
Armory.

Description The moment someone sees your setup, they can tell whether it was thrown together — or built with intention. When a rifle sits too far off the wall, it disrupts the entire look of a clean armory. Excess space, bulky mounts, and unnecessary offsets make even a well-built rifle feel cluttered. The HexCore AR-15 Low Profile Wall Mount solves that with reduced-offset geometry designed to pull your rifle in tighter to the wall. The result is a cleaner, more streamlined presentation that immediately signals a disciplined, well-organized setup. Built specifically for rifles with minimal or compact accessories, this mount keeps your build sitting close, stable, and perfectly aligned — exactly how a refined armory should look. When someone walks into your shop, safe room, or display wall, they won’t see a rifle floating awkwardly off the wall. They’ll see a tight, deliberate layout where every piece of equipment has its place. Whether installed in a safe, a gear room, or a full armory display, the HexCore Low Profile Mount keeps your rifle secure while maintaining the clean, intentional aesthetic serious builders aim for. Because the difference between a cluttered wall and a professional setup…is how precisely everything is mounted. Tech Specs   Compatibility: Works with AR-15–style firearms chambered in 5.56 / .223 / .300 Blackout and other calibers using standard magazines such as M2 and M3 PMAGs Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch—press the release to remove Mounting Options: Ambidextrous design supports left- or right-facing orientation or vertical mounting (90° rotation) Clearance Profile: Low-profile design keeps your rifle closer to the wall, ideal for compact builds with minimal front-end accessories What's Included 1 × AR-15 Low Profile Wall Mount Mounting hardware: 1x #8 x 3" Self-Tapping Screws (Black Oxide) 1x #8 x 1 1/2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description   The moment someone sees your setup, they know whether you run real gear — or just collect rifles. When an AR-15 is built with serious equipment — large optics, weapon lights, and front-end accessories — standard mounts start to look like an afterthought. Clearance issues, awkward contact points, and cluttered spacing instantly make a setup look unrefined. The HexCore AR-15 XL Wall Mount solves that with extended offset geometry engineered specifically for rifles that are actually built out. Your optics, lights, and attachments have the space they need, while the rifle sits in a clean, intentional position that immediately signals a well-thought-out system. When someone walks into your shop, safe room, or armory wall, they don’t see a rifle crammed onto a hook. They see a setup that looks deliberate, organized, and ready. This mount was built for shooters who take pride in their equipment and how it’s presented. Whether displayed on your wall, staged in a safe, or part of a larger armory setup, the HexCore XL Mount keeps your rifle protected, unobstructed, and positioned like the tool it is — not just another piece of gear. Because the difference between a gear wall and an armory…is how intentionally everything is mounted. Tech Specs   Compatibility: Works with AR-15–style firearms chambered in 5.56 / .223 / .300 Blackout and other calibers using standard magazines such as M2 and M3 PMAGs Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch—press the release to remove Mounting Options: Ambidextrous design supports left- or right-facing orientation or vertical mounting (90° rotation) Clearance Profile: Extended standoff for front-end accessory space What's Included 1 × AR-15 XL Wall Mount Mounting hardware: 1x #8 x 3" Self-Tapping Screws (Black Oxide) 1x #8 x 1 1/2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description When wall space is at a premium, the AR-15 Vertical Wall Mount delivers purpose-built efficiency without compromising security. Engineered for fast access and a clean footprint, this mount holds your AR-15 upright with the top rail facing out-maximizing your display area while providing stable, form-fit retention. Perfect for gun walls, safes, lockers, and tight storage areas where horizontal mounting isn't practical, this vertical solution keeps your setup organized, efficient, and ready when it matters.   Tech Specs   Compatibility: Works with AR-15–style firearms chambered in 5.56 / .223 / .300 Blackout and other calibers that use standard magazines such as M2 and M3 PMAGs Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch-press the release to remove Mounting Orientation: Vertical only (barrel oriented upward). Verify magwell locking orientation prior to installation. Not intended for horizontal use-horizontal installation may compromise retention and could lead to mount failure. Mount Dimensions: Height x Width x Depth [in] 4.7 x 1.1 x 6.1 What's Included 1 × AR-15 Vertical Wall Mount Mounting hardware: 2x #8 x 2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description Engineered for seamless integration with your modern firearm, the MLOK Vertical Gun Mount provides purpose-built retention directly through the rifle's accessory rail. This innovative system eliminates mechanical latches, relying on precision-engineered cut-outs and gravity to secure the firearm-allowing for a single, fluid upward-and-outward motion for deployment. The intelligent design maintains full readiness by leaving the magwell completely unobstructed. Unlike conventional mounting solutions, this allows a magazine to remain inserted, ensuring your system is prepared for immediate action. Built for universal compatibility, this mount interfaces with any MLOK-compatible rail or handguard, regardless of platform. The extended variant increases the offset from 0.5" to 1", with matching buffer tube offset spacer included providing the necessary clearance for offset accessories such as lights, red dots, and lasers. For maximum stability. Beyond firearm storage, the M-LOK Vertical Mount also serves as an excellent solution for organizing spare handguards in your workshop or armory. It keeps rails elevated off the bench, out of drawers, and displayed in a clean, accessible position. Tech Specs Compatibility: Works with any MLOK rail/handguard, regardless of platformRetention System: Our MLOK mount secures the rifle by interfacing with the firearm's rail/handguard. Lift up and out to remove.Mounting Orientation: Vertical only (barrel oriented upward). Verify magwell locking orientation prior to installation. Not intended for horizontal use-horizontal installation may compromise retention and could lead to mount failure. What's Included 1 × MLOK Vertical Wall Mount Mounting Hardware: 2x #8 x 2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description The moment someone sees your setup, they know whether it was thrown together — or built with purpose. Large-frame rifles like the AR-10 deserve more than a bulky rack or a mount that leaves unnecessary space behind the rifle. Excess offset pushes the rifle too far off the wall and breaks the clean, intentional look that a well-organized armory should have. The HexCore AR-10 Low Profile Wall Mount solves that with reduced-offset geometry designed to pull your rifle in tighter while maintaining the secure, form-fit retention HexCore is known for. Your rifle sits closer to the wall, creating a cleaner, more refined presentation that immediately communicates a well-thought-out setup. Built for AR-10 rifles running minimal or compact accessories, this mount keeps your build tight, stable, and perfectly positioned — exactly how a disciplined armory should look. When someone walks into your shop, safe room, or gear wall, they won’t see a rifle floating awkwardly off the wall. They’ll see a setup that looks deliberate, organized, and ready. Whether installed on a display wall, inside a safe, or as part of a full armory layout, the HexCore AR-10 Low Profile Mount keeps your rifle secure while maintaining the clean aesthetic serious shooters expect. Because the difference between a rifle wall and a true armory…is how intentionally everything is mounted.   Tech Specs   Compatibility: Works with AR-10–style firearms chambered in .308, 7.62, 6.5 Creedmoor, and similar calibers using standard Magpul LR/SR magazines (SR-25 / M110 / DPMS pattern) Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch-press the release to remove Mounting Options: Ambidextrous design supports left- or right-facing orientation or vertical mounting (90° rotation) Clearance Profile: Low-profile design keeps your rifle closer to the wall, ideal for compact builds with minimal front-end accessories What's Included 1 × AR-10 Low Profile Wall Mount Mounting hardware: 1x #8 x 3" Self-Tapping Screws (Black Oxide) 1x #8 x 1 1/2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description The moment someone sees your setup, they know whether it’s built for looks — or built with purpose. Large-frame rifles like the AR-10 are often equipped with serious hardware: larger optics, weapon lights, bipods, and front-end accessories. Standard mounts weren’t designed for builds like that. They create clearance issues, awkward contact points, and cramped spacing that make even a well-built rifle look forced into place. The HexCore AR-10 XL Wall Mount solves that with extended offset geometry engineered specifically for fully equipped rifles. Your optics, lights, and attachments have the space they need, while the rifle sits naturally in a clean, intentional position that immediately signals a well-thought-out setup. When someone walks into your shop, safe room, or armory wall, they won’t see a heavy rifle crammed onto a generic rack. They’ll see a system that looks organized, deliberate, and ready. Built for shooters who run real setups, this mount keeps your fully equipped AR-10 protected, unobstructed, and positioned exactly where it belongs — whether on a display wall, staged in a safe, or part of a larger armory build. Because the difference between storing a rifle…and presenting a system…is how intentionally everything is mounted.   Tech Specs   Compatibility: Works with AR-10–style firearms chambered in .308, 7.62, 6.5 Creedmoor, and similar calibers using standard Magpul LR/SR magazines (SR-25 / M110 / DPMS pattern) Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch-press the release to remove Mounting Options: Ambidextrous design supports left- or right-facing orientation or vertical mounting (90° rotation) What's Included 1 × AR-10 XL Wall Mount Mounting hardware: 1x #8 x 3" Self-Tapping Screws (Black Oxide) 1x #8 x 1 1/2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description When wall space is at a premium, the AR-10 Vertical Wall Mount delivers purpose-built efficiency without compromising security. Engineered specifically for larger-frame rifles, this mount holds your AR-10 upright with the top rail facing out-maximizing your display area while providing stable, form-fit retention designed for the added size and weight of your platform. Perfect for gun walls, safes, lockers, and tight storage areas where horizontal mounting isn't practical, this vertical solution keeps your setup organized, accessible, and intentionally laid out.   Tech Specs   Compatibility: Works with AR-10–style firearms chambered in .308, 7.62, 6.5 Creedmoor, and similar calibers using standard Magpul LR/SR magazines (SR-25 / M110 / DPMS pattern) Retention System: Our Mag Catch technology secures the rifle by latching onto the firearm's magazine catch-press the release to remove Mounting Orientation: Vertical only (barrel oriented upward). Verify magwell locking orientation prior to installation. Not intended for horizontal use-horizontal installation may compromise retention and could lead to mount failure. What's Included 1 × AR-10 Vertical Wall Mount Mounting hardware: 2x #8 x 2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.

Description Engineered for seamless integration with your modern firearm, the MLOK Vertical Gun Mount provides purpose-built retention directly through the rifle's accessory rail. This innovative system eliminates mechanical latches, relying on precision-engineered cut-outs and gravity to secure the firearm-allowing for a single, fluid upward-and-outward motion for deployment. The intelligent design maintains full readiness by leaving the magwell completely unobstructed. Unlike conventional mounting solutions, this allows a magazine to remain inserted, ensuring your system is prepared for immediate action. Built for universal compatibility, this mount interfaces with any MLOK-compatible rail or handguard, regardless of platform. The extended variant increases the offset from 0.5" to 1", with matching buffer tube offset spacer included providing the necessary clearance for offset accessories such as lights, red dots, and lasers. For maximum stability. Beyond firearm storage, the M-LOK Vertical Mount also serves as an excellent solution for organizing spare handguards in your workshop or armory. It keeps rails elevated off the bench, out of drawers, and displayed in a clean, accessible position. Tech Specs Compatibility: Works with any MLOK rail/handguard, regardless of platformRetention System: Our MLOK mount secures the rifle by interfacing with the firearm's rail/handguard. Lift up and out to remove.Mounting Orientation: Vertical only (barrel oriented upward). Verify magwell locking orientation prior to installation. Not intended for horizontal use-horizontal installation may compromise retention and could lead to mount failure. What's Included 1 × MLOK Vertical Wall Mount Mounting Hardware: 2x #8 x 2" Self-Tapping Screws (Black Oxide) Important Notes Firearms are not included. HexCore Mounts is not an FFL and does not sell firearms. Our products are for display and organizational use only and do not modify or enable firearm function. No components for discharge or ammunition are provided.